How To Use The Hammer?

(1) The hand should be held at the end of the British Chipping Hammer handle, and the hand holding the hammer should not be too close to the hammer. Not only is it inconvenient to use, but it is also easy to hurt your fingers.

(2) When using a hammer, attach the goggles as much as possible. Especially when nailing nails, concentrate on your hands, otherwise you will hurt your fingers.

(3) When the nail is first nailed, hold the nail near the nail cap and gently tap the nail cap with a hammer. When you have nailed it in, the hand holding the nail is loosened and then nailed.

(4), nails using a hammer with a flat hammer, never use a round hammer.

(5), the handle of the hammer can only be used to hold the hammer, not to use it to hit things or when used as a bark.

(6), hit hard metal, do not use ordinary British Type Claw Hammer, use a leather toe hammer or soft metal hammer. Never use a hammer to strike a wrench or another hammer.

(7) When using a hammer, hold your hand tightly. When you are waving, be careful not to injure people or touch other equipment.

(8) Do not use wrenches, round steel, bolts or other equipment parts as hammers.

(9) When using a sledgehammer to strike a workpiece to be clamped, it is necessary to use a clamp or other suitable clamping device to clamp the workpiece, and be careful not to stand in the range of the hammer. The person holding the workpiece is at right angles to the plane of the sledgehammer, and both wear goggles. When swinging a sledgehammer, the key is to drop the hammer accurately, and you should also pay attention to the hammer handle not to touch anything.

(10), the work of each hammer, there is a hammer that is suitable for it, you must choose the right one.